mbr3035pt thru mbr3060pt vishay general semiconductor document number: 88676 revision: 07-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 dual common-cathode schottky rectifier features ? guardring for overvoltage protection ? lower power losses, high efficiency ? low forward voltage drop ? high forward surge capability ? high frequency operation ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in low voltage, high frequency rectifier of switching mode power supplie s, freewheeling diodes, dc-to-dc converters or polarity protection application. mechanical data case: to-247ad (to-3p) epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 30 a v rrm 35 v to 60 v i fsm 200 a v f 0.60 v, 0.65 v t j max. 150 c pin 1 pin 3 case pin 2 to-247ad (to-3p) 1 2 3 note: (1) 2.0 s pulse width, f = 1.0 khz maximum ratings (t a = 25 c unless otherwise noted) parameter symbol mbr3035pt mbr3045pt mbr3050pt mbr3060pt unit maximum repetitive peak reverse voltage v rrm 35 45 50 60 v maximum working peak reverse voltage v rwm 35 45 50 60 v maximum dc blocking voltage v dc 35 45 50 60 v maximum average forward rectified current (fig. 1) i f(av) 30 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load per diode i fsm 200 a peak repetitive reverse surge current per diode (1) i rrm 2.0 1.0 a voltage rate of change at (rated v r ) dv/dt 10 000 v/s operating junction temperature range t j - 65 to + 150 c storage temperature range t stg - 65 to + 175 c
mbr3035pt thru mbr3060pt vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88676 revision: 07-may-08 2 note: (1) pulse test: 300 s pulse width, 1 % duty cycle ratings and characteristics curves (t a = 25 c unless otherwise specified) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol mbr3035pt mbr3045pt mbr3050pt mbr3060pt unit maximum instantaneous forward voltage per diode (1) i f = 20 a i f = 20 a i f = 30 a i f = 30 a t c = 25 c t c = 125 c t c = 25 c t c = 125 c v f - 0.60 0.76 0.72 0.75 0.65 - - v maximum instantaneous reverse current at rated dc blocking voltage per diode (1) t c = 25 c t c = 125 c i r 1.0 60 5.0 100 ma thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol mbr3035pt mbr304 5pt mbr3050pt mbr3060pt unit thermal resistance from junction to case per diode r jc 1.4 c/w ordering information (example) package preferred p/n unit weight (g) package code base quantity delivery mode to-247ad MBR3045PT-E3/45 6.13 45 30/tube tube figure 1. forward current derating curve 0 6 12 24 30 0 50 100 150 1 8 mbr3035pt - mbr3045pt mbr3050pt & mbr3060pt resisti v e or ind u cti v e load a v erage for w ard c u rrent (a) case temperat u re (c) figure 2. maximum non-repetitive peak forward surge current per diode 0 50 150 100 250 200 300 1 100 10 nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) t j = t j max. 8 .3 ms single half sine- w a v e
mbr3035pt thru mbr3060pt vishay general semiconductor document number: 88676 revision: 07-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical instantaneous forw ard characteristics per diode figure 4. typical reverse characteristics per diode 100 10 1 0.1 0.01 0 0.2 0.1 0.5 1.0 0.4 0.3 0.6 0.7 0. 8 0.9 t j = 150 c t j = 25 c instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) mbr3035pt - mbr3045pt mbr3050pt & mbr3060pt 1 10 100 0.01 0.001 0.1 20 0 100 40 60 8 0 t j = 25 c t j = 75 c percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent (ma) t j = 125 c mbr3035pt - mbr3045pt mbr3050pt & mbr3060pt figure 5. typical juncti on capacitance per diode figure 6. typical transient thermal impedance per diode 10 1 100 1000 10 000 100 0.1 re v erse v oltage ( v ) j u nction capaci tance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p mbr3035pt - mbr3045pt mbr3050pt & mbr3060pt 0.01 10 1 100 10 100 0.1 0.1 1 t - p u lse d u ration (s) transient thermal impedance (c/ w ) pi n 1 pi n 3 case pi n 2 to-247ad (to-3p) 0.245 (6.2) 0.225 (5.7) 0.645 (16.4) 0.625 (15.9) 0.323 ( 8 .2) 0.313 (7.9) 0.142 (3.6) 0.13 8 (3.5) 0.170 (4.3) 0.0 8 6(2.1 8 ) 0.076 (1.93) 0.160 (4.1) 0.140 (3.5) 0.225 (5.7) 0.205 (5.2) 0.127 (3.22) 0.117 (2.97) 0.04 8 (1.22) 0.044 (1.12) 0.795 (20.2) 0.775 (19.6) 0. 8 40 (21.3) 0. 8 20 (20. 8 ) 1 2 3 0.07 8 (1.9 8 ) ref. 0.203 (5.16) 0.193 (4.90) 10 typ. both sides 30 10 1 ref. both sides 0.030 (0.76) 0.020 (0.51) 0.11 8 (3.0) 0.10 8 (2.7)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
